• White gloss surface for vivid colour graphic displays
• REACH compliant PVC (phthalate free) for greener environment
• Grey glue back conceals show through of previously pasted graphics
• Excellent adhesion on wide variety of substrates such as Sunboard, Bubbleguard, ACP
• Easy application & Stainfree removal on Glass Windows & Panels
• Siliconized PE coated paper liner, offers easy of handling with excellent flatness

• POP - POS Displays
• Exhibition Panels
• In-store advertising
• Graphic on Graphic Displays

• Condition the media in the normal printing environment for 24 hours before printing
• We don't recommend application of our Grey glue adhesive vinyl on Wall surfaces & Laminated display board.
• Please ensure during graphic on graphic application, there is no dust residue, oil stains, food stains, adhesive stains, moisture / dampness on the earlier pasted graphics, which will lead to adhesion failure. Clean the earlier pasted graphics with a lint-free cloth/mop before pasting fresh graphic on to it.
• Ensure that while printing on HP Latex series printers, the media is attached to the takeup reel for better stability during printing, there by avoiding headstrikes & bulging

• Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing
• Use a pair of cotton gloves to handle the media and protect it from sweat, grease & oil
• When not in use, store the media in original packing in a vertical position

● This media is compatible with original inks of most eco-solvent, solvent, UV & latex printers. Please consult the ink/printer manufacturer for technical advice if required.
● Pre-test the compatibility of the inks with the media before commencing actual production.

● The durability of the printed image is dependent on the fading characteristics of the inks used.
● Pre-test the compatibility of the lamination film with the printed media. Allow 8-24 hours of drying time of the print before lamination.