Picture of NeoBond PUR 2A (NCO) & 2B (OH)
# Images are for illustration purpose only

NeoBond PUR 2A (NCO) & 2B (OH)

Solvent less Polyurethane Lamination Adhesive

NeoBond PUR 2A (NCO) & 2B (OH) is Solvent Less Bi Component PU based Adhesive System. It is used in the ratio of 100:60 parts for LLDPE and 100:70 parts for Metalized on high speed solvent less machines like Nord Mechanica. Suitable for laminates using following films: PET, BOPP, MCPP, LLDPE, MET BOPP etc.

SKU Code Description UOM Price No. of Packs Quantity Total Price(INR) Billing Location Delete
    • NeoBond PUR 2A (NCO) & 2B (OH) is an economic adhesive system for production of standard laminates for General to medium Performance application.
    • Suitable for low temperature applications 35 - 45 OC.
    • Excellent adhesion to different types of film.
    • No residual odor.
    • Best suited for Food Packaging.
    • Good heat sealing and resistance properties.
    • Low coating weights.
    • Gives good bond strength with speckling free results
    • NeoBond PUR 2A (NCO) & 2B (OH) is Solvent Less Bi Component PU based Adhesive System.
    • It is used in the ratio of 100:60 parts for LLDPE and 100:70 parts for Metalized on high speed solvent less machines like Nord Mechanica.
    • Suitable for laminates using following films: PET, BOPP, MCPP, LLDPE, MET BOPP etc. 
    • Storage & Handling: Store in original air tight container at temperatures between 10-35C. Stir well before use. Rotate stocks on FIFObasis
    • Shelf life: 6 months from the date of packing
    • Packing: 200 kg drum
    • Caution: NeoBond 2A (NCO) & PUR (OH) is non-toxic, non-hazardous and non-flammable under normal conditions of use. Splashes in the eyes or skin; spillage in workplace and on clothes should be immediately washed with plenty of water to avoid skin irritation. Proper ventilation should be provided in work area.
    • Always remember to run machine in slow speed around 100 meter/minutes initially after the job change so that fresh adhesive completely replaces the old one & then gradually pick up speed.
    • During job change the coating roller and transfer rollers should be kept running so as to prevent adhesive from drying on the roller.
    • For Metallized (BOPP/CPP) substrates, appropriate speeds and coating weights must be pre-determined before taking a commercial run. High speed runs in Metallized substrates may result in speckling.
    • Laminates must be processed/slit at-least after 24 hrs. of initial lamination.
    • Rollers should be cleaned properly if machine stops for more than 30 min. and suitable solvent is Ethyl Acetate or MEK.
Product tags

Connect With Us