• Suitable for dark prints, Matt films. No tarnishing of Gold prints.
• Better performance with respect to Creasing, Embossing, Guttering in Carton Manufacturing & Book  Binding.
• It is odorless.
• Printed Shades are not affected by the use of this adhesive.
• Application system can be cleaned by use of normal water.
• High degree of non-foaming characteristics.
• No wrinkles on ageing up-to 80°C for 2 hours with film PET.
• On line slitting can be conducted in the application of film to printed paper/board using dry lamination process.

• General Purpose Dry Lamination

• Storage&Handling: Store in original air tight containers at temperatures between 10-35oC. Stir well before use. Rotate stocks on FIFO basis

• Shelf-life: 6 months from the date ofmanufacturing
• Packing: 25 kgdrum
• Caution: NeoBond DLM 2050 is non–toxic, non-hazardous and non-flammable under normal conditions of use. Splashes in the eyes should be immediately washed with plenty of water

Operating Instructions

• Drying Roller Temperature    : 85oC
• Drying Box Temperature       : 90oC
• Nipping Roller Temp             : 80oC

Cleaning Procedure

• Clean the machine thoroughly and ensure removal of all solvent traces from the application roller and adhesivetray
• Once the adhesive is poured in the tray, keep the adhesive application roller running to avoid skin formation and drying of adhesive on theroller
• Clean the Rollers with water and scrub lightly with soft cloth. Wipe off excess liquidby means of soft cloth and then immediately clean with EthylAcetate/Toluene