NovaSign PosterMatte PVC Grey Glue 100 SA (WPM 7514 GGBF)

NovaSign PosterMatte Bubble Free PVC Grey Glue 100 SA 
For eco-solvent, solvent, UV & latex inkjet printing of promotional displays
Product Description & Application
NovaSign PosterMatte Bubble Free PVC Grey Glue 100 SA (WPM 7514 GGBF) is a matte, self-adhesive soft monomeric calendared vinyl with an ice white hue. It is recommended for eco-solvent, solvent, UV & latex inkjet printing for indoor & outdoor signages such as posters, stickers, vehicle wrapping & tri-vision applications.
Features & Benefits
Bubble Free property avoids entrapment of air bubbles leading to ease of application.
Corrections can be made during application as adhesion built up is slow.
High ink limit ensures vibrant colour gamut and vivid displays.
Excellent adhesion to a variety of substrates for wide range of applications.
Siliconized PE coated paper liner for excellent flatness.
Product Specifications
Base
:
Soft monomeric calendared PVC Film
Surface Finish
:
Matte
Thickness
:
100 microns (± 10 micron)
Liner
:
140 (± 5 gsm) gsm PE coated siliconized paper
Finished product weight
:
290 (± 10 gsm)
Adhesive type
:
Solvent Polyacrylate Permanent Grey
Adhesive power
:
After 24 hours, stainless steel 8 - 10 N/25mm
Ink Compatibility
:
Eco-solvent & solvent, UV & latex inks
Ink Limit
:
Around 260% with original inks
Storage
:
One year stored out of direct sunlight at 23oC and 50% humidity
Shelf-Life
:
Up to 2 years
Available Sizes
:
914 mm x 50 m; 1060 mm x 50 m; 1270 mm x 50 m; 1370 mm x 50 m; 1520 mm x 50m
Compatibility
This media is compatible with original inks of most of most eco-solvent, solvent, UV & latex printers. Please consult the ink/printer manufacturer for technical advice if required.
Pre-test the compatibility of the inks with the media before commencing actual production.
To achieve the best possible print quality, please make sure that the correct ICC profiles and heater settings are used. For further assistance, please contact our HelpDesk.
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used.
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction while mounting on surface or cleaning after mounting. It is strongly recommended that the prints are laminated with a cold, pressure sensitive vinyl lamination media.
Usage Instructions
It is recommended to condition the media in the normal printing environment for 24 hours before printing.
While printing, care must be taken to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration.
The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding and lower resolution.
Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
If the printed media needs to be laminated, we recommend using a cold lamination film. Pre-test the compatibility of the lamination film with the printed media prior to use. Please allow 8 hours of drying time of the print before lamination.
A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
When not in use, the media should be stored in its original packing in a vertical position.