• Versatile formulation: effectively cleans anilox/rubber rollers & blankets
• Excellent solvency: effectively cleans hard dried aqueous and UV varnishes
• Ideal viscosity: easy to apply and wash off
• Controlled pH: safer on anilox roller and metal parts

• Apply sufficient amount of AniKleen Sol with a lint free cloth to dilute and remove aqueous and UV varnish from the coating blanket.
• Remove the residues with a clean damp cloth or sponge.

• Apply sufficient amount of AniKleen Sol on the roller and spread evenly over the surface. Use a lint free cloth or appropriate brush and gently apply in a circular motion and leave for 10-15 minutes.
• Remove the residues with a clean damp cloth or sponge. Rinse any remaining residue with water. Severely clogged rollers may require a second application.

• Pour sufficient amount of AniKleen Sol to loosen the aqueous varnish.
• Allow to run for 3-5 minutes at idling speed.
• Pour sufficient amount of water to remove the residues by engaging the ducter blade.

• For dried/cured deposits on anilox rollers, grippers or any other metal parts, apply sufficient amount of AniKleen Sol and allow it to remain for sufficient time.
• Remove the residues with a clean damp cloth or sponge. Rinse any remaining residue with water.

Note : For painted surface ,test the product for suitability on a non-descript area.

• Storage & Handling : Protect from direct sunlight. Store at moderate temperature in dry, well ventilated area. Keep containers tightly closed when not in use. Use of hand gloves is recommended.
• Shelf-life : 12 months from the date of manufacture.
• Packing : 1 ltr
• Caution : Avoid contact with skin and eyes.