Picture of NovaFlash Developer
# Images are for illustration purpose only

NovaFlash Developer

Premium single-step lacquer developer for wipe-on negative platemaking

NovaFlash Developer is a premium single-step, coloured, lacquer-developer for wipe-on negative platemaking on fine grained and anodised aluminium plate.

SKU Code Description UOM Price No. of Packs Quantity Total Price(INR) Billing Location Delete
    • Ready-to-use developer.
    • The coloured lacquer provides high visibility and a durable image.
    • Suitable for manual processing.
    • To be applied directly on the plate after exposure.
    • Keep the plate firmly resting on a flat and clean surface.
    • Shake the NovaFlash Developer container gently to avoid bubble formation on plate and pour sufficient quantity to cover the plate surface.
    • Apply evenly over plate surface using a swab of wet-squeezed cotton.
    • Work the developer over the entire plate surface with a circular motion of the hand.
    • Continue application for approximately 2 minutes with light pressure. The fully developed plate will have excellent image contrast.
    • Rinse the plate thoroughly under a jet of running water
    • Examine the plate for underdeveloped images and repeat application before finishing, if necessary.
    • Storage & Handling : Protect from direct sunlight. Store below 35°C in a dry, well-ventilated area. Keep the containers closed. The use of gloves and safety goggles is strongly recommended.
    • Shelf-life : 12 months from the date of manufacture.
    • Packing : 1 & 5 litres.
    • Precautions : Sponges are not recommended for use with NovaFlash Developer. Shake the can gently to avoid bubble formation. The room should be properly ventilated. Accidental drying of developer on the plate is easily removed by fresh developer.
Product tags

Connect With Us