NeoBond HMPU 100 is solvent-less Mono Component PU Adhesive system for lamination of Film/ Foil to Paper/Board on Steinmann type machines for Graphic Art Packaging applications & Nordmechanica type Flexible Packaging application. Normally the coating is applied on to film and then laminated to other substrate (paper/board). Best suited for food packaging.

• Grade: HMPU
• Colour & Appearance: Clear to slight pale yellow
• Peel Value@ 180°: Approx. 1.0N/cm
• Nip Roller: 60oC (depending on type of substrate)
• Coating: 2.0 gms to 6.0 gms for Paper/Board to Film/Foil

Solvent Less Mono Component PU Adhesive system for lamination of Paper or Board to Films and Foil on Steinmann type machines for Graphic Art Packaging Applications & Nordmechanica type Flexible Packaging Application. Normally coating is applied on to paper and then laminated to other substrate.

• Grade: PUR
• Colour & Appearance: Clear to slight pale yellow
• Peel Value@ 180°: Approx. 1.0N/cm
• Nip Roller: 60oC (depending on type of substrate)
• Coating: 2.0 gms to 6.0 gms for Paper/Board to Film/Foil

NeoBond PUR 2A (NCO) & 2B (OH) is Solvent Less Bi Component PU based Adhesive System. It is used in the ratio of 100:60 parts for LLDPE and 100:70 parts for Metalized on high speed solvent less machines like Nord Mechanica. Suitable for laminates using following films: PET, BOPP, MCPP, LLDPE, MET BOPP etc.

PUR 80/HD-75N is a two component PU based general to medium performance adhesive for a versatile range of FlexiblePackaging applications and is suitable for standard laminates as well as triplex laminates. This Adhesive shows good bond strength on Al Foil, PET-MPET, LLDPE, BOPP, MBOPP, CPP, MCPP etc.

• Grade: PUR
• Colour & Appearance: Clear to slight pale yellow
• Specific Gravity: 1.18 + 0.22