● Smooth surface for sharp and fine output
● Excellent transparency for uniform reproduction
● Quick drying for high productivity

For manual & Cad drawings for architectural, engineering and construction. Also suitable for offset and screen positives. 

● It is recommended to condition the media in the normal printing environment for 24 hours before printing.
● The media is sensitive to temperature and humidity fluctuations. It is advisable to store the media at room temperatures between 18-24oC and air humidity between 45-55%
● Care needs to be taken while handling the printed media that needs to be stored for a long time. Paper-based media is prone to discolouration and flaking, if not stored properly. For better storage life it is advisable to use film based media. Please contact our application specialist for advice.
● The media should be printed within the specified ink / toner limit. Exceeding the ink / toner limit can lead to longer drying time, bleeding, lower resolution and poor adhesion of the paper.
● Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
● The absorbent nature of the paper may result in the warping of the media when printed with a heavy, graphic intensive file leading to difficulties in printing. Special care should be taken while printing such files to avoid damage to the printer head.
● A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat; grease and oil transfer on to the media that could adversely affect the print quality.
● When not in use, the media should be stored in its original packing. Over exposed to humidity will cause cocking on print surface while printing.