• Versatile polyester fabric base for wide range of backlit applications
• Special coating for uniform light diffusion
• Bright white finish offers superior contrast & wide colour gamut
• Strong fabric base provides high physical strength during mounting or framing
• Water resistance feature best suited for humid & outdoor conditions

Suitable for backlit boxes, silicon edge frames, scrollers and other backlit applications. 

• It is recommended to condition the media in the normal printing environment for 24 hours beforeprinting.
• While printing, care must be taken to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration.
• Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing. Printed media can be protected using a clear UV stabilised varnish.
• Pre-test the compatibility of the varnish with the printed media prior to use. Please allow adequate drying time of the print before varnishing.
• A fresh pair of cotton gloves should be used while handling the bare media to avoidsweat, grease and oil transfer on to the media that could interfere with the printquality.
• When not in use, the media should be stored in its original packing in a vertical position.