● Gloss finish surface for enhanced appeal of prints
● Clear transparent adhesive for high image clarity
● Siliconized PE coated paper liner for excellent flatness
● Versatile film suitable for use on various substrates like PET, PVC, PP & Paper

Enhance aesthetics of digital prints and protect them from scratches, stains, moisture and potentially damaging gases in both indoor and outdoor environment

● Check the lamination film for compatibility with the base media and for the end use application.
● Allow the digital prints to dry for 4 to 6 hours at 300C to 350C at RH <60% before lamination. In case of higher RH, we recommend longer drying time of prints.
● While laminating prints with heavy ink lay downs, allow longer drying time.
● Use original inks for printing the graphics. Unbranded inks may react with the adhesive of the lamination film and cause “colour shift”.
● It is observed that lamination often causes colour shift when used over digital prints. For critical colour reproduction we suggest using custom colour profiles for printing the base media.
● Before trimming or mounting the laminated print, wait for at least one hour to allow adequate boding of lamination film.
● Use a pair of cotton gloves to handle the media and protect it from sweat, grease & oil.
● When not in use, store the media in original packing in a vertical position.