●    Superior white base for wide colour gamut and deep rich blacks
●    Special coating for uniform light diffusion and excellent backlit effect
●    Tear resistant and lay flat properties for hassle free mounting and framing
●    Anti-skid & anti-static back coating provides superior grip while printing
●    High strength film suitable for use in motion displays
●    PVC-free media for eco-friendly printing

Backlit boxes (Tradeshow displays, Retail & Department store displays), scrollers (motion displays), LED frames, Bus Shelters and Metro Illuminated displays

●    Condition the media in the normal printing environment for 24 hours before printing.
●    Print the media within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding and lower resolution.
●    Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.

• Use a pair of cotton gloves to handle the media and protect it from sweat, grease &
• When not in use, store the media in original packing in a vertical

●  The durability of the printed image is dependent on the fading characteristics of the inks used.
●    Pre-test the compatibility of the lamination film with the printed media before use.
●    Allow 8-24 hours of drying time of the print before lamination.