●    Real canvas fabric gives a feel of original painting & art
●    Special coating for sharp and vibrant prints
●    Bright white base offers superior contrast and wide colour gamut
●    Thick fabric base provides high physical strength during mounting on frames
●    Water resistance for best performance even in humid conditions

●    It is recommended to condition the media in the normal printing environment for 24 hours before printing.
●    While printing, care must be taken to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration.
●    The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding and lower resolution.
●    Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing. Printed media can be protected using a clear UV stabilised varnish. Pre-test the compatibility of the varnish with the printed media prior to use. Please allow adequate drying time of the print before varnishing.
●    A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
●    When not in use, the media should be stored in its original packing in a vertical position.

●    This media is compatible with original inks of the most eco-solvent, solvent, UV & latex printers. Please consult the ink/printer manufacturer for technical advice if required.
●    Pre-test the compatibility of the inks with the media before commencing actual production.
●    To achieve best possible print quality, please make sure that correct ICC profiles and heater settings are used. For further assistance, please contact our HelpDesk.

●  The durability of the printed image is dependent on the fading characteristics of the inks

●  If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction while mounting on frames or cleaning after mounting, it is strongly recommended that a UV stabilised varnish is used to protect the