NovaLife Clarus PET 175 SS (Clarus 175)

Premium non-tear film for photo and general commercial applications

NovaLife Clarus PET 175 SS (Clarus 175) is a single side coated PET (Polyethylene Terephthalate) film for Electrophotography, Offset, Flexo and Screen Printing. Ideally suited for special effects in wedding albums, overlays in multi-layered printing and similar applications.

    • PET Film base provides tear resistance, stiffness and long-term durability
    • Optical clarity enables designers to creatively layer multiple printed images, allowing for the combination of elements that create depth and dimension
    • This media is compatible with white ink, enabling reverse & sandwich printing
    • The carrier sheet at the back helps in sensing the leading edge
    • Good anti-static properties for trouble free printing and dust free outputs
    • Thermally stable PET Film base allows post print finishing involving heat such as thermal lamination
  • Wedding albums

    Photo books

    Overlays in multi-layered printing

    POS displays

    • We recommend thorough testing of the substrate for intended application prior to use
    • Please refer the user guide of the printing machine for correct printer settings & for best output & media settings please consult the service engineer of the press
    • Please ensure the sheets are acclimatized to the printing environment for 24 hours before Best print results can be obtained at 20-25°C, 55% ± 10% relative humidity (RH)
    • To facilitate jam-free feeding, please fan or jog the sheets before printing
    • To extend the print life, (thermal) lamination or varnishing after printing is advisable. The lamination film or varnish must be checked for compatibility with the media
    • The durability of the printed images will depend on the fading characteristics of the ink or toner Please consult with ink or toner supplier
    • Hold media by the edges to avoid kink Fingerprints will affect the quality of the image. A fresh pair of cotton gloves should be used while handling unprinted media to avoid sweat, grease and oil transfer on to the media that could affect the print quality. When not in use, store the media in cool & dry place [20-25°C, 55%±10% RH] away from direct sunlight in its original packing. Keep media in flat position to avoid curling
    • This media can be recycled through appropriate polyester (PET) recycling channels
  • Products specifications
    Attribute name Attribute value
    Base Polyester Film (PET)
    Thickness 175 ± 10 microns (240 ± 7 gsm) (Without carrier sheet)
    Surface Finish Clear
    Printability Single Side printable
    Available Sizes 320 x470 (mm), 330 x 482 (mm) , 530 x 750 (mm)