Backlit boxes, LED frames, POP & POS displays, glow signs and many more.

• Condition the media in the normal printing environment for 24 hours before printing.
• Print the media within the specified ink limit. Exceeding the ink limit can lead tolonger drying time, bleeding and lower resolution. For best results, use colourcalibration.
• Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
• Post-processing for hem is not required. If necessary, banner tape is preferred to sewing. Grommets should be placed through 2 layers in thehemline.
• Corner grommets should be placed where the vertical and horizontal hemlines meet, so that they pass through 4 layers of the media.

• Use a pair of cotton gloves to handle the media and protect it from sweat, grease &
• When not in use, store the media in original packing in a vertical

• Pre-test the compatibility of the lamination film with the printed
• Allow 8 hours of drying time of the print before