• Superior white base for wide colour gamut and deep rich colours
• Special coating for uniform light diffusion and excellent backlit effect
• Scratch-free, tear resistance surface for use in motion displays
• Tear resistant and lay flat properties for hassle-free mounting and framing
• High strength film suitable for use in motion displays
• PVC-free media for eco-friendly printing

Backlit boxes, scrollers (motion displays), LED frames, POP & POS displays, Glow signs 

• Condition the media in the normal printing environment for 24 hours before printing.
• Print the media within the specified ink limit. Exceeding the ink limit can lead to longerdrying time, bleeding and lower resolution. For best results, use colour calibration.
• Printed media should be thoroughly dried before rolling-up for transport to avoid inksmearing.
• Post-processing for hem is not required. If necessary, banner tape is preferred to sewing. Grommets should be placed through 2 layers in thehemline.
• Corner grommets should be placed where the vertical and horizontal hemlines meet, so that they pass through 4 layers of themedia.
• Use a pair of cotton gloves to handle the media and protect it from sweat, grease &oil.
• When not in use, store the media in original packing in a vertical position.

• Use a pair of cotton gloves to handle the media and protect it from sweat, grease &
• When not in use, store the media in original packing in a vertical

●  The durability of the printed image is dependent on the fading characteristics of the inks used.
●   Pre-test the compatibility of the lamination film with the printed media before use.
●   Allow 8-24 hours of drying time of the print before lamination.