Picture of Thermotect
# Images are for illustration purpose only

Thermotect

High quality baking solution for CtP Thermal & PS positive working plates

Thermotect is a high-quality patented baking solution for protection of non-image areas of CtP thermal and PS positive plates during baking.

SKU Code Description UOM Price No. of Packs Quantity Total Price(INR) Billing Location Delete
    • Eliminates the need to re-develop or otherwise etch the plates after baking.
    • Prevents dot growth during baking.
    • The applied layer of Thermotect breaks down during the baking process for easy removal by wet-washing.
    • Can be applied by hand or used directly in the gumming section of a plate processor.
    • For hand development : Apply to the developed (and deleted) plate with a clean sponge or cotton wool pad. Spread the solution evenly over the entire plate surface. Buff down to a thin, even film. Care should be taken to avoid contamination of RC510 from either the sponge or the bench.
    • For processor development : Use the full-strength solution in the finishing / gumming section of the plate processor, following the instructions of the equipment manual. For best results, the solution should be maintained at a specific gravity between 1.065 to 1.075. Under normal circumstances, this will be achieved by replenishing RC510 diluted in water.
    • Storage & Handling : Store at moderate room temperatures in a dry, well-ventilated area. Protect from heat and direct sunlight. Keep the containers closed.
    • Shelf-life : 12 months from the date of manufacture.
    • Packing : 5 litres.
    • Precautions : Avoid contact with eyes and skin.
Product tags

Connect With Us