NovaJet PhotoGloss PE Paper 240 WR (PGP 240 WR)

NovaJetTM PhotoGloss PE Paper 240 WR
For thermal and piezo inkjet printing of water-resistant prints for proofing and photographic applications
Product Description & Application
NovaJet PhotoGloss PE Paper 240 WR (PGP 240 WR) is a PE coated paper, top-coated with glossy ink-receptive layer. It is suitable for proofing applications and Indoor applications such as high resolution posters for photographic prints.
Features & Benefits
Compatible with water-based dye & pigment inks for printing on wide variety of inkjet printers
High whiteness for wide colour gamut and deep rich colours
High opacity for limited show-through
High image definition and line clarity for better resolution and sharper proofs
Water-resistant media for longer life of printed image
Good colour stability for long lasting prints when kept away from direct sunlight
Minimal optical brightners for accurate proofing outputs
Product Specification
PE coated paper
240 gsm (± 5 gsm)
Surface Finish
Ink Compatibility
Water-based Dye & Pigment Inks
Ink Limit
Up to 360% with Dye Inks, 280% & above with Pigment Inks
Two years from the date of manufacture when stored in original packing at 20-25°C and 50% RH.
Available Sizes
610 mm x 30 mtrs; 914 mm x 30 mtrs; 1067 mm x 30 mtrs; 1270 mm x 30 mtrs
Compatibility with Water-based Dye & Pigment Inks
PRINTER Ink Type Dye Pigment
HP   DesignJet Z2100 / Z3100 / Z6100
DesignJet 430 / 750
DesignJet 1xx / 5xx / 8xx
DesignJet 1xxx / 4xxx
  DesignJet 2xxx / 3xxx / 5xxx
Epson   Stylus 4000 / 7000 / 9000 / 10000
  Stylus 7500 / 9500
Stylus 4000 / 7600 / 9600 / 10600
  Stylus 10000 CF
Stylus 4800 / 7800 / 9800
Canon   Image Pro Graph 6200 / 8200
  Image Pro Graph 6400 / 8400
Superior Compatibility Non Compatibility Under Testing Not Applicable
Tested with Original Inks.
While printing on dye-based ink compatible media using HP DesignJet Printer Models 1xx / 5xx / 8xx & 430 / 750, 1xxx / 4xxx, use "PhotoGloss" media profile for printing.
The Epson Stylus 4000 / 7600 / 9600 / 10600 series are tested with UltraChrome Inks and Epson Stylus 4800 / 7800 / 9800 with K3 inks respectively.
Durability In Indoor Conditions
The durability of the printed image is dependent on the fading characteristics of the inks used. Please consult the ink manufacturer for technical advice.
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction.
NovaJet PhotoGloss PE Paper 240 WR, when printed and protected as indicated above (with a laminate), can have an image life expectancy of up to 3 months.
Usage Instructions
It is recommended to condition the media in the normal printing environment for 24 hours before printing.
While printing, care must be taken to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration. For further assistance, please consult our HelpDesk.
The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding, lower resolution and poor adhesion of the lamination media.
Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
When not in use, the media should be stored in its original packing, in a vertical position.