Product Description & Application
Jiffy is a premium, universal image remover gel for CtP thermal and presensitised positive plates.
Features & Benefits
Ready-to-use, viscous, colourless fluid
Enables complete removal of unwanted image areas within 30 to 60 seconds of contact
No solvent odour
Does not creep away or spread from the contact area
Does not damage the non-image areas of the plate
Designed for universal application on long-run as well as short-run positive plates
Usage Instructions
After developing, rinse the plate thoroughly and apply a finishing gum
Shake the bottle well before use
Apply the fluid directly on the areas to be deleted using a fine brush
Leave the solution in contact for approximately 60 seconds with light brushing
Even if the image is invisible, the solution must be left in contact with the areas to be deleted for a minimum of 30 seconds. Repeat application if necessary
Rinse the plate with fresh water and squeeze off excess water
Apply a finishing gum and buff dry
Storage, Handling & Packaging
Storage & Handling
Store at moderate temperatures in a dry, well-ventilated area. Protect from direct sunlight. Keep the containers tightly closed. The use of gloves and goggles is strongly recommended while handling Jiffy.
12 months from the date of manufacture.
100 ml.
When left undisturbed for a period of time, the fluid thickens to form a viscous gel. Vigorous shaking of the container will bring the solution back to fluid state. Avoid skin and eye contact.