NovaSign High Gloss PVC 80 SA (HGV 4213 HT)

NovaSign High Gloss PVC 80 SA 
For eco-solvent, solvent, UV & latex inkjet printing of promotional displays
Product Description & Application
NovaSign High Gloss PVC 80 SA (HGV 4213 HT) is a high glossy, high-tac adhesive, soft monomeric calendared vinyl. It is recommended for eco-solvent, solvent, UV & latex inkjet printing of outdoor & indoor applications; such as exhibition posters, POP / POS displays, vehicle graphics, commercial signages and many more.
Features & Benefits
Natural white gloss surface for wide colour gamut and deep rich colours./div>
Superior grade PVC base for excellent ink absorption property & colour reproduction.
High-tac adhesive for strong bonding to variety of surfaces, for wide range of applications.
Siliconized PE coated paper liner for excellent flatness.
Product Specifications
Face
:
Monomeric PVC
Surface Finish
:
Gloss
Gloss Rate - 60o
:
> 65%
Base Thickness
:
80 micron (± 5 micron)
Release Liner
:
140 gsm one sided PE coated white wood pulp paper
Total weight
:
295 gsm (± 5 gsm)
Adhesive Type & Colour
:
Permanent clear glue
Ink Compatibility
:
Eco-solvent, solvent, UV & latex inks
Initial adhesion
:
> 18 N / inch
Shelf-Life
:
One year from the date of manufacture when stored in original packing out of direct sunlight at 20-25oC and 55% RH.
Available Sizes
:
990 mm x 50 m, 1270 mm x 50 m & 1524 mm x 50 m
Compatibility
This media is compatible with original inks of most eco-solvent, solvent, UV & latex printers. Please consult the ink/printer manufacturer for technical advice if required.
Pre-test the compatibility of the inks with the media before commencing actual production.
To achieve the best possible print quality, please make sure that the correct ICC profiles and heater settings are used. For further assistance, please contact our HelpDesk.
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used.
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction while mounting on surface or cleaning after mounting. It is strongly recommended that the prints are laminated with a cold, UV stabilized, pressure sensitive vinyl lamination media.
Usage Instructions
It is recommended to acclimatize the media in the normal printing environment for 24 hours before printing.
A fresh pair of cotton gloves should be used while handling the bare media to avoid dirt & sweat transfer on the media that could interfere with the print quality.
While printing, it is required to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration.
The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding and lower resolution.
Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
If the printed media needs to be laminated, we recommend using a cold lamination film. Pre-test the compatibility of the lamination film with the printed media prior to use. Please allow 8 hours of drying time of the print before lamination.
When sandwiched between clear and translucent acrylic sheets, ensure that the prints are completely dry and the panels are thoroughly cleaned.
A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
When not in use, the media should be stored in its original packing in a vertical position.