NovaSign Eco-sol BannerMatte PET 160 Grey Back (EMO 7506)

NovaSign BannerMatte PET 160 Grey Back 
For eco-solvent & solvent inkjet printing of frontlit banners
Product Description & Application
NovaSign Eco-sol BannerMatte PET 160 Grey Back (EMO 7506) is a tear-resistant, coated PET media for eco-solvent, solvent, UV & latex inkjet printing. It is suitable for indoor & outdoor applications such as roll-up banners, roller blinds, hanging banners and many more.
Features & Benefits
High whiteness for wide colour gamut and deep rich colours.
Unique PET coated base provides high temperature resistance on latex printers.
High opacity (grey back) for maximum light blockout.
Rigid PET base ensures non-curl & standstill image in the banner stand.
Product Specifications
Polyester Film
160 microns (± 10 microns)
Surface Finish
White Matte
Back Finish
Grey Blockout
Ink Compatibility
Eco-solvent, Solvent, UV & Latex based inks
Ink Limit
Up to 270% with Eco-Solvent inks
One year from the date of manufacturing when stored in original packing at 20-25oC and 50-65% RH.
940 mm x 50 m; 1270 mm x 50 m; 1524 mm x 50 m Also available in custom size rolls on request
This media is compatible with original inks of most eco-solvent, solvent, UV & latex printers. Please consult the ink/printer manufacturer for technical advice if required.
To achieve the best possible print quality, please make sure that the correct ICC profiles and heater settings are used. For further assistance, please contact our HelpDesk.
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used.
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction while mounting on surface or cleaning after mounting. It is strongly recommended that the prints are laminated with a cold, pressure sensitive vinyl lamination media.
Usage Instructions
It is recommended to condition the media in the normal printing environment for 24 hours before printing.
While printing, care must be taken to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration.
The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding and lower resolution.
Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
Post-processing for hem is not required. If necessary, banner tape is preferred to sewing. Grommets should be placed through 2 layers in the hemline.
Corner grommets should be placed where the vertical and horizontal hemlines meet, so that they pass through the 4 layers of the media.
If the printed media needs to be laminated, we recommend using a cold lamination film. Pre-test the compatibility of the lamination film with the printed media prior to use. Please allow 8 hours of drying time of the print before lamination.
A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
When not in use, the media should be stored in its original packing in a vertical position.