NovaSign PosterSatin Paper 150 Dry Gum

NovaSign PosterSatin Paper 150 Dry Gum
For Eco-solvent, UV & Latex inkjet printing of Poster and Wall murals.
Product Description & Application
NovaSign PosterSatin Paper 150 (PSP 150 DG) is a white satin, front print, water-resistant paper, top-coated with an ink-receptive layer for eco-solvent, UV & latex inkjet printing. It has a special water activated, dry-gum back which offers an easy-to-use solution for DIY Print - paste applications. This media is ideally suitable for Posters and Wall mural applications for home and commercial spaces.
Features & Benefits
Natural whiteness for wide colour gamut and deep rich colours.
Water activated,dry-gum facilitates easy to use solution for DIY print-paste application.
Special coating provides water resistant and stain resistant surface.
PVC-free & recyclable, makes it easier to dispose of than most PVC based medias.
Product Specifications
150 Gsm (± 5 Gsm)
Surface Finish
White Satin
Back Finish
Water activated, dry-gum coating
Gum Type
Water based permanent adhesive
Ink Compatibility
Eco-solvent, Latex 3rd generation & UV inks
Ink Limit
Up to 250 % with eco-solvent inks
One year from the date of manufacture when stored in original packing at 20 - 25°C and 50% RH.
914 mm x 50 m, 1270 mm x 50 m, 1524 mm x 50 m, 1624 mm x 50 m.
Compatibility with original eco-solvent inks for printers of Epson SC Series, Roland series, Mutoh Valujet series & Mimaki JV series. This media is also suitable for printing with Latex 3rd generation inks & UV inks.
Note: Pre-test the compatibility of the inks with the media for the design application, before commencing actual production. To achieve the best possible print quality, please make sure that the correct ICC profiles and heater settings are used. For further assistance, please contact our HelpDesk.
Durability In Indoor Conditions
The durability of the printed image is dependent on the fading characteristics of the inks used.
Avoid using unbranded inks. Please consult the ink manufacturer and printer manufacturer for technical advice on the suitable inks.
Usage Instructions
It is recommended to condition the media in the normal printing environment for 24 hours before printing.
To achieve best possible print quality, please make sure that the correct ICC profiling, colour calibrations are used. For further assistance, please contact our HelpDesk.
While printing care must be taken to modify the print file to suit the ink limit of the media.
The media should be printed with the specific ink limit.
For faster drying of inks, it is recommended to dry the media with an external electrical fan heater.
Wallpaper application instructions are available as part of Annexure.No - M/QA/TM/130, please refer to the same.