NovaSign PosterSatin Paper 140 SA
For Eco-solvent, Solvent, UV and Latex 3rd generation inkjet printing of promotional displays.
Product Description & Application
NovaSign PosterSatin Paper 140 SA (PSP 0316) is a satin white multi-layered water resistant self adhesive paper for Eco-solvent, Solvent, UV & Latex 3rd generation inkjet printing. It is suitable for indoor applications such as Posters, POP & POS promotions, Panels and Signs at exhibition, advertising promotions.
Features & Benefits
Natural whiteness for wide colour gamut and deep rich colours.
Self adhesive feature for permanent & easier mounting of printed graphics on substrates used for promotional displays.
Special coating provides water resistant and stain resistant surface for easier cleaning with a non abrasive sponge dampened in water.
Paper based self adhesive media provides green offering against the conventional Self adhesive vinyl medias for indoor displays.
Product Specifications
Face
:
Paper
Surface Finish
:
White Satin
Face + Adhesive Grammage
:
140 gsm (± 10 gsm)
Liner Grammage
:
100gsm PE Coated paper liner
Adhesive Type
:
Permanent Solvent Acrylic Adhesive
Initial adhesion to Stainless Steel ( @ 20 min )
:
12 N / 25mm, Fibre tear observed
Ultimate adhesion Stainless Steel ( @ 24 hrs )
:
Fibre Tear observed. Bonding is permanent
Ink Compatibility
:
Eco-Solvent, Solvent, UV and Latex 3rd generation Inks
Ink Limit
:
Up to 260% with Eco Solvent Inks
Shelf-Life
:
One year from the date of manufacture when stored in original packing at 20-25°C and 50-55% RH
Available Sizes
:
914 mm x 30 m; 1067 mm x 30 m; 1270 mm x 30 m
Compatibility
Compatible with original solvent & eco-solvent inks from printers of Epson SC series, Roland series, Mutoh Valujet series, Mimaki JV series. This media is also compatible with UV inks and Latex 3rd generation inks.
Note : Pre-test the compatibility of the inks with the media for the design application, before commencing actual production. To achieve the best possible print quality, please make sure that the correct ICC profiles and heater settings are used. For further assistance, please contact our HelpDesk.
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used. Please consult the ink manufacturer for technical advice.
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere, or if there is a likelihood of scratching & friction, it is strongly recommended that the prints are laminated with a UV stabilised vinyl lamination film with a solvent-based adhesive.
This media, when printed and protected as indicated above (with a laminate), can have an image life expectancy of up to 6 months in indoor conditions.
Usage Instructions
Pre-test the compatibility of the inks with the media for design application, before commencing actual production.
To achieve the best possible print quality, please make sure that the correct ICC profiling, colour calibration is used. For further assistance, please contact our HelpDesk.
It is recommended to condition the media in the normal printing environment for 24 hours before printing.
While printing, care must be taken to modify the print file to suit the ink limit of the media.
Printed media should be thoroughly dried before rolling-up for transport to avoid smearing.
A fresh pair of cotton gloves should be used while handling the bare media to avoid transfer of sweat, grease and oil on to the media as it could interfere with the print quality.
When not in use, the media should be stored in its original packing in a vertical position. (Exposure to high humidity will cause cockling on paper surface while printing)
For faster drying of inks, it is recommended to dry the media with an external electrical fan heater.
Incase of stains, please use a non abrasive sponge dampened in water & clean the surface with minimal pressure. Do not over rub the surface, it will damage the paper & printed graphics.