NovaSign PosterGloss PVC Grey Glue 100SA (WPG 7214 GG)

NovaSignTM PosterGloss PVC Grey Glue 100 SA
For eco-solvent, solvent, UV & latex inkjet printing of promotional displays
Product Description & Application
NovaSign PosterGloss PVC PVC Grey Glue 100 SA (WPG 7214 GG) is a glossy, self-adhesive soft monomeric calendared vinyl with natural white hue. It is recommended for eco-solvent and solvent inkjet printing for outdoor & indoor applications such as posters, stickers & short-term advertising. This film offers superior flatness due to its double side coated PE liner; hence it can be used for screen printing of decals and other similar applications.
Features & Benefits
High Gloss PVC base makes this film excellent for signage
High ink limit ensures vibrant color gamut and vivid displays
Natural whiteness for high color contrast
Good sheet stability & lay flatness for ease of conversion and application
Excellent adhesion to a variety of substrates for wide range of applications
Siliconized double sided PE coated paper liner for excellent flatness
Product Specifications
Soft monomeric calendared PVC Film
Base Thickness
100 microns (± 10 micron)
Finished product weight
290 ± 20 gsm
Surface Finish
Gloss, 70% gloss value at 60°
Permanent Clear solvent acrylic adhesive
140 gsm single side PE coated siliconized paper
Initial Adhesion
9-12 N / inch
Ink Compatibility
Eco-solvent & Solvent inks
Ink Limit
Around 350% with original inks
One year from the date of manufacture when stored in original packing at 20-25°C and 50% RH.
Available Sizes
914 mm x 50 m, 1060 mm x 50 m, 1270 mm x 50 m 1370 mm x 50 m & 1520 mm x 50 m
This media is compatible with original inks of most eco-solvent, solvent, UV & latex printers. Please consult the ink/printer manufacturer for technical advice if required.
Pre-test the compatibility of the inks with the media before commencing actual production.
To achieve the best possible print quality, please make sure that the correct ICC profiles and heater settings are used. For further assistance, please contact our HelpDesk.
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used.
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction while mounting on surface or cleaning after mounting. It is strongly recommended that the prints are laminated with a cold, UV stabilized, pressure sensitive vinyl lamination media.
Usage Instructions
It is recommended to acclimatize the media in the normal printing environment for 24 hours before printing
A fresh pair of cotton gloves should be used while handling the bare media to avoid dirt & sweat transfer on the media that could interfere with the print quality
While printing, it is required to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration
The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding and lower resolution.
Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
If the printed media needs to be laminated, we recommend using a cold lamination film. Pre-test the compatibility of the lamination film with the printed media prior to use. Please allow 8 hours of drying time of the print before lamination.
When sandwiched between clear and translucent acrylic sheets, ensure that the prints are completely dry and the panels are thoroughly cleaned
A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
When not in use, the media should be stored in its original packing in a vertical position.