NovaSign EcoSolvent Backlit FrontPrint PVC 190 (ESB 9758)

NovaSignTM Eco-solvent Backlit FrontPrint PVC 190
For Eco-solvent & solvent inkjet printing of backlit displays
Product Description & Application
NovaSign Eco-solvent Backlit FrontPrint PVC 190 (ESB 9758) is a white satin, front print, PET reinforced PVC backlit media for eco-solvent, UV and latex inkjet printing. It is suitable for indoor & outdoor applications such as backlit light boxes for shop fascia & bus shelters, LED frames, rota cubes and many more.
Features & Benefits
Specially designed light diffusion coating offers uniform backlit property
Superior whiteness for wide colour gamut and deep rich colours
PET reinforced base ensures non-curl & standstill image in the backlit box
Tear resistant and lay flat properties for hassle free mounting and framing
Product Specifications
PET reinforced PVC
190 microns (± 10 microns)
Surface Finish
White Satin
Ink Compatibility
Eco-solvent & Solvent inks
Also compatible with UV & Latex (3rd gen) inks
Ink Limit
Up to 230% with Eco-solvent inks
One year from the date of manufacturing
when stored in original packing at 20-25O C and 50-65% RH (± 5%).
914 mm x 30 m; 1270 mm x 30 m; 1524 mm x 30 m
Also available in custom size rolls on request.
This media is compatible with original inks of most eco-solvent, solvent, UV & latex (3rd Generation) printers. Please consult the ink/printer manufacturer for technical advice if required.
Pre-test the compatibility of the inks with the media before commencing actual production.
To achieve the best possible print quality, please make sure that the correct ICC profiles and heater settings are used. For further assistance, please contact our HelpDesk.
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used.
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction while mounting on surface or cleaning after mounting. It is strongly recommended that the prints are laminated with a cold, pressure sensitive vinyl lamination media.
Usage Instructions
It is recommended to condition the media in the normal printing environment for 24 hours before printing.
While printing, care must be taken to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration.
The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding and lower resolution.
Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
To get print quality with high depth and vibrant colours we recommend using “Double Strike” print control mode available in Roland's Versa Works RIP.
ESB 9758 is a PET reinforced PVC backlit and would require an external post print electrical fan heater for faster production.
If the printed media needs to be laminated, we recommend using a cold lamination film. Pre-test the compatibility of the lamination film with the printed media prior to use. Please allow 8 hours of drying time of the print before lamination.
A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
When not in use, the media should be stored in its original packing in a vertical position.