NovaSign OverLamination Satin PVC 90 UV (CPS 3314 UV)

NovaSignTM OverLamination Satin PVC 90 UV
For cold over lamination of digital prints with UV protection.
Also suitable for printing
Product Description & Application
NovaSign OverLamination Satin PVC Lamination 90 UV (CPS 3314 UV) is a pressure sensitive adhesive coated satin textured finish, cold lamination film for protection of digital prints / silver halide photos against scratches, stains, moisture and potentially damaging gases in both indoor and outdoor environment. It is optimised with UV absorbers to help extend the life of water based inkjet prints from fading in indoor applications. This film is also suitable for printing with eco-solvent, UV or latex inks for window graphics.
Features & Benefits
Optically clear adhesive for high image clarity
High Quality PVC media for ease of handling during manual & machine lamination
Suitability for laminating prints on PET, PP, PVC & Paper substrates makes it ideal for wider variety of applications
Printable with eco-solvent, UV and latex inks for window graphics
Optimised with UV absorber for improving the shelf life of inkjet prints especially for indoor applications
This media gives best results when used with images printed on NovaJet inkjet media
Product Specification
90 microns
Release Liner Thickness
110 gsm (±10 gsm)
Surface Finish
Acrylic, Solvent based & Permanent
One year from the date of manufacturing when stored in original packaging at 25oC to 30oC & 50% RH (± 5%)
Available Sizes
914 mm x 50 m, 1270 mm x 50 m
UV Absorption Spectrum  
Usage Instructions
We recommend that prints are dried for 4 to 6 hours at 30oC to 35oC at RH < 60% before laminating. In case of higher RH, we recommend longer drying times
While laminating prints with heavy ink lay downs, allow longer drying time before lamination
Usage of original inks is highly recommended, other inks may react with the adhesive and cause “colour shift”
Make sure that proper tension and pressure are being used during the lamination process.
Lamination will often cause colour shift in images. For critical colour reproduction, it is best to build custom colour profiles. For further assistance, please contact our HelpDesk
The lamination media must be checked for compatibility with the media & end use application of the finished product
It is recommended to wait at least for one hour before trimming or mounting the laminated print to allow adequate bonding of lamination
When not in use, the lamination media should be stored in its original packing