TechNova Laser Plate : Hydromarc for NovaDom

Home Products Laser Plates

Hydromarc Roller Paste

(Laser Plates - Product Code :4301603)

A revolutionary, dual action roller cleaning paste, ideal for fast colour changes. Also recommended for routine de-glazing and maintenance wash-up of rollers.

Features

Ready-to-use paste.
Achieves thorough cleaning and de-glazing of the rollers within the short time of 4 to 5 minutes.
Penetrative cleaning is enhanced by controlled build-up of tack while the rollers are in motion. Critical colour change (black to yellow) possible with a single step application.
Does not impart adverse chemical effect on rubber or metal rollers.
Protects & deep cleans rubber rollers, conditioning the surface with a unique additive: Hydro-M

Instructions

Clean the ink from the rollers and blankets normally at the end of the job. Disengage the wash-up blades and apply sufficient quantity of Hydromarc Roller Cleaning Paste on the rollers using an ink knife to cover the entire surface to be cleaned. Run in the paste for approximately 3 to 5 minutes. Hydromarc Roller Cleaning Paste is designed to achieve extremely high quality cleaning. The penetrative cleaning agents works within the pores releasing the embedded ink pigments and glaze while the progressive tack build-up pulls out the loosened particles from the rollers for complete cleaning in the shortest time. Rinse away the residue using a normal press wash-up solvent. A non-water miscible solvent such as Revivo Wash will be ideal.

Hydromarc Roller Cleaning Paste achieves thorough cleaning within the specified span of time. Longer dwell time of the paste on running rollers could lead to excessive tack build-up.

Packing
250g