     
|
|
|
|
 |
 |
|
|
Home  Products Chemistry
|
Flash PS
(Plateroom Chemicals - Product Code : 310312X)
Product Description
Photosensitive PS positive coating solution for whirler application on grained aluminium plate.
Characteristics
- Ready-to-use, flammable coating solution.
- Sensitive to heat and day light.
- Compatible for use with grained aluminium plate.
- Designed for manual coating of plates using whirlers.
- Exposure to UV light softens the coating. Exposed coating is developed with PS plate developer.
- Flash Point : 32°C.
Fix the plate firmly in the whirler and adjust the speed at 40 to 50 rpm depending on the size of the plate to be coated. Pour sufficient quantity of water in the center of the plate to rinse the surface evenly. Allow the plate to dry. Apply the coating solution on the dry plate surface by pouring sufficient quantity at the center of the plate. Allow steady uninterrupted flow until the coating spreads evenly over the entire surface. Close the lid of the whirler. Increase the whirler speed up to 80 to 100 rpm and allow the plate to dry completely.
Caution :
The Material Safety Data Sheet (MSDS) should be read and understood thoroughly prior to using this product. Ensure adequate precautions as directed. (Click here for MSDS sheet)
Store away from sources of heat, sparks, open flames and static electricity charges. Use of uncovered heating filaments in the whirler not recommended. Provide sufficient ventilation in the coating area. Insufficient ventilation and use of whirler heater during coating application could cause nausea and eye irritation.
Packing
250 ml.
Home | Contact Us | Links | Site Info | Members
©1998-2000 TechNova Imaging Systems Ltd. All rights reserved. Legal information.