     
|
|
|
|
 |
 |
|
|
Home  Products Chemistry
|
Unifin
(Plateroom Chemicals - Product Code : 311105X)
Unifin is a high quality, general-purpose plate finisher and desensitiser, suitable for use with all plate types.
Features
- Suitable for use on all types of plates
- Good desensitising properties
- Protects the background from finer-marking and scuffing during handling
- Can be used for storage of uninked plates for up to one month
- Suitable for both processor and hand application
- Protected against bacterial spoilage by broad-spectrum biocide.
Instructions
For hand application : After development, wash the plate with water, squeegee and apply the finisher at the approximate rate of 50 ml per m2. Buff down with a clean lint-free cloth to a thin even film and dry.
For processor application : Fill the processor gum section with full strength Unifin as described in the processor instruction manual. Unifin diluted with water should be used for replenishment, with the objective of maintaining the working solution in the specific gravity range 1.065 to 1.075. Under extreme conditions, the dilution may be altered suitably to combat excessive increase in viscosity.
Packing
1L & 5 L
Home | Contact Us | Links | Site Info | Members
©1998-2000 TechNova Imaging Systems Ltd. All rights reserved. Legal information.