NovaDenseTM Plus
For enhancing the image density of the laser printer film.
Product Description & Application
NovaDense Plus is an image density booster solution which enhances the toner density on the laser printer film. The enhanced toner density on the film produces image quality comparable with silver-sensitised graphic arts film (lith film) and it is therefore perfectly suitable for exposing presensitised positive/negative offset plates and screens.
This solution is ideally suitable for enhancing image quality of NovaSharp films used for applications such as Brochures, Newsletters, Sales Literature, Stationery, Forms, Labels, Books, Posters, Leaflets, etc.
Features & Benefits
Enhances image density of the Laser Printer Film >2.50 Maximum Density, which is comparable to lith film
It is a quick drying solution
User-friendly; does not produce toxic fumes or any physical reaction
Product Specification
State
:
Liquid
Odour
:
Light odour
Flash Point
:
- 8oC
Disposal Consideration
:
Dispose according to regulations specific to country.
Image Density after use of NovaDense Density Booster Solution
:
> 2.5
Available Packing Sizes
:
1 Litre Bottles.
Shelf-Life
:
Six months from the date of manufacture when stored in original packing at 20-25oC and 50% RH.
Workflow
Usage Instructions
Shake well before use
Use NovaEnhancer System for image enhancement process
Do not wipe the wet film
Fan-dry at room temperature
How it works
Print image on NovaSharp Laser Printer Film
Fill approximately 300ml of NovaDense Plus solution into the solution tray of NovaEnhancer System
Switch on the NovaEnhancer System
Pass the imaged film through NovaEnhancer System with the toner side facing down. Ensure the film is loaded straight
Allow the enhanced film to roll out of the NovaEnhancer System completely
Fan-dry the enhanced film by holding it from the edge. Do not touch the image while it is still wet, as this can leave finger marks on the image
The enhanced film is now ready to use, for exposing the offset / Flexo plates or screens
Handling & Storage Instructions
Avoid direct contact with skin & eyes. In case of accidental contact with skin or eyes, flush the affected area with cold water
Do not inhale the vapour, as it may cause drowsiness or dizziness
Wear suitable rubber gloves while handling the solution
Keep away from any source of ignition and direct sunlight. Do not expose to temperature exceeding 50oC
Use in a well ventilated place
Warning Instructions
Highly flammable. Do not spray on naked flame or incandescent material
Harmful if taken internally
Keep away from children