NovaFlashTM Developer
Product Description & Application
NovaFlash Developer is a premium single-step, coloured, lacquer-developer for wipe-on negative platemaking on fine grained and anodised aluminium plate.
Features & Benefits
Ready-to-use developer.
The coloured lacquer provides high visibility and a durable image.
Suitable for manual processing.
To be applied directly on the plate after exposure.
Usage Instructions
Keep the plate firmly resting on a flat and clean surface.
Shake the NovaFlash Developer container vigorously and pour sufficient quantity to cover the plate surface.
Apply evenly over plate surface using a swab of wet-squeezed cotton.
Work the developer over the entire plate surface with a circular motion of the hand.
Continue application for approximately 2 minutes with light pressure. The fully developed plate will have excellent image contrast.
Rinse the plate thoroughly under a jet of running water
Examine the plate for underdeveloped images and repeat application before finishing, if necessary.
Storage, Handling & Packaging
Storage & Handling
Protect from direct sunlight. Store below 35°C in a dry, well-ventilated area. Keep the containers closed. The use of gloves and safety goggles is strongly recommended.
12 months from the date of manufacture.
1 & 5 litres.
Sponges are not recommended for use with NovaFlash Developer. The room should be properly ventilated. Accidental drying of developer on the plate is easily removed by fresh developer.