NovaJet PhotoSatin PE Paper 190 WR (PSP 190 WR)

NovaJet PhotoSatin PE Paper 190 WR
For water based (dye & pigment) inkjet printing of high resolution proofing & photographic applications
Product Description & Application
NovaJet PhotoSatin PE Paper 190 WR (PSP 190 WR) is a PE coated paper, Satin finish, top-coated with ink-receptive layer. It is suitable for proofing applications and indoor applications such as high resolution posters for photographic prints.
FA : Fogra Approved media for proofing application.
Features & Benefits
High whiteness for wide colour gamut and deep rich colours
High opacity for limited show-through
High image definition and line clarity for better resolution and sharper proofs
Water-resistant media for longer life of printed image
Minimal optical brightners for accurate proofing outputs
Product Specification
PE coated paper
Total Weight
190 gsm (± 5 gsm)
Surface Finish
Ink Compatibility
Water-based Dye & Pigment Inks
Ink Limit
Up to 360% with Dye Inks, 250% & above with Pigment Inks
Two years from the date of manufacture when stored in original packing at 20-25oC and 50% RH.
432 mm x 30 m; 610 mm x 30 m; 914 mm x 30 m; 1067 mm x 30 m; 1118 mm x 30 m & 1524 mm x 30 m
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used. Please consult the ink manufacturer for technical advice.
Usage Instructions
It is recommended to condition the media in the normal printing environment for 24 hours before printing.
While printing, care must be taken to modify the print file to suit the ink limit of the media. For best results, please ensure proper color calibration. For further assistance, please consult our HelpDesk.
The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding, lower resolution and poor adhesion of the lamination media.
Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
When not in use, the media should be stored in its original packing, in a vertical position.