NovaJetTM Laser Matte Opaque PET 125 DS  
Color laser printable non-tear media for photo realistic prints
Product Description & Application
NovaJet Laser Matte Opaque PET 125 DS (LMO 5505) is a Polyester film specially coated on both sides which is suitable for electrophotography, screen & offset printing. It is suitable for high quality Photo books, visiting cards, indoor signage, invitation cards and posters
Features & Benefits
PET film base provides tear resistance, stiffness, thermal stability for long term durability
Outstanding toner & ink adhesion for sharp and high definition images
Thermally stable PET film base allows for thermal lamination
PET film substrate provides excellent weather ability
Good antistatic properties for dust-free outputs and trouble free printing
Writable surface allows you to add comments, signature and it can be stamped as well for application of certificates
High Opacity allows printing on both sides
Product Specifications
Polyester Film
Total Thickness
125 ± 5 microns (170 ± 5 gsm)
Surface Finish
White Matte
> 96 %
Two years from the date of packing when stored in original packing at 20-25oC and 55% ±10 RH
Sizes Available
330 mm x 482 mm, 320 mm x 488 mm,
320 mm x 470 mm 305 mm x 457 mm, 297mm x 420 mm
Other sizes available on request of minimum quantity of 5000 sheets
Pack Size
100 Sheets / Pack
Other Variant
NovaJet Laser Matte Opaque is also available in 200 & 275 Mic. Also available for dry toner digital printers.
Available in Translucent & Pearl finish.
Printer Compatibility
Company Model
HP Indigo 3500, Indigo 5500, Indigo 5600, Indigo 7500 & Indigo 7600
Konica Minolta Bizhub Pro C6501 / Bizhub Pro C6500
Canon C6000 AP / C 7000 VPOKI
OKI C9xxx, C910/ES9410, C830/810/801/821, C610/ES6410, C711/ES7411MGI
Ricoh Pro C751

Tested with original toners on above machines
HP Indigo, Konica Minolta and Oki approved media
Usage Instructions
Kindly refer to your printer user guide for instructions on appropriate printer settings.
We recommend thorough testing of the material in its intended application prior to use.
For best output & media settings in printer, it is recommended to involve service engineer of printer manufacturer who will do the correct & desired setting to get optimum imaging result.
Please ensure the sheets are conditioned to the printing environment for 24 hours before use in the room where it is intended to be printed.
To facilitate jam-free feeding, fan the required number of sheets.
Best print results can be obtained at 20 - 25°C, 55 +10% RH with original toners.
Please ensure proper earthing of the machine.
Lamination after printing is advisable for extended print life. The lamination film must be checked for compatibility with the media.
Proof the Job on low cost paper of same size before printing final impressions on the film.
The durability of the printed images will depend on the fading characteristics of the toner used. Please consult with toner manufacturer for technical advice.
Handling & Storage Instructions
Hold the media by the edges. Fingerprints will affect the quality of the image. A fresh pair of cotton gloves should be used while handling bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
Store the media in cool, dry place (20-25°C, 55% +10 RH) away from direct sunlight. When not in use, the media should be stored in its original packing.
Store the media in flat position, to avoid curling.