NovaJet Laser Matte Opaque PET 275 DS

NovaJetTM Laser Matte Opaque PET 275 DS
Color laser printable non-tear media for photo realistic print
Product Description & Application
NovaJet Laser Matte Opaque Film 275 DS (LMO 5511) is a Polyester film specially coated on both sides which is suitable for digital & offset printing. It is suitable for high quality Photo books, visiting cards, indoor signage, invitation cards, greeting cards, table mattes, temporary name & number plates and posters.
Features & Benefits
PET film base provides tear resistance, stiffness, thermal stability for long term durability
Outstanding toner & ink adhesion for sharp and high definition images
Thermally stable PET film base allows for thermal lamination
PET film substrate provides excellent weather ability
Good antistatic properties for dust-free outputs and trouble free printing
Writable surface that enables adding stamping and adding comments and signatures
High Opacity allows printing on both sides
Product Specifications
Polyester Film
275 ± 5 microns (380 ±10 gsm)
Surface Finish
White Matte
> 95%
Two years from the date of manufacture when stored in original packing at 20-25oC and 55% ±10 RH
Sizes Available
330 mm x 482 mm, 320 mm x 488 mm, 320 mm x 470 mm
305 mm x 457 mm, 297mm x 420 mm, 362 mm x 570 mm
Other sizes available on request of minimum quantity of 5000 sheets
50 Sheets / Pack
Other Variant
NovaJet Laser Matte Opaque is also available in 125 & 200 mic
Also available for dry toner digital printers.
Available in Translucent & Pearl finish.
Printer Compatibility & Settings Chart
Company Model
HP 5600 & Indigo 7600
Xerox DC 12
DC 5252 / 6060
I Gen 3 / I Gen 4
Konica Minolta C 6000 / C 8000 / Bizhub Pro C6501 / Bizhub Pro C6500
Canon C6000 AP / C 7000 VP
Ricoh Pro C751
Usage Instructions
Kindly refer to your printer user guide for instructions on appropriate printer settings.
We recommend thorough testing of the material in its intended application prior to use.
For best output & media settings in printer, it is recommended to seek assistance from the service engineer of printer manufacturer who can suggest the ideal setting to get optimum imaging result.
Please ensure the sheets are conditioned, before use, to the printing environment for 24 hours in the room where it is intended to be printed.
To facilitate jam-free feeding, fan the required number of sheets prior to placing in printer.
Best print results can be obtained at 20 - 25oC, 55 +10% RH with original toners.
Please ensure proper earthing of the machine.
Lamination after printing is advisable for extended print life. The lamination film must be checked for compatibility with the media.
Proof the Job on low cost paper of same size before printing final impressions on the film.
The durability of the printed images will depend on the fading characteristics of the toner used. Please consult with toner manufacturer for technical advice.
Handling & Storage Instructions
Hold the media by the edges. Fingerprints will affect the quality of the image. A fresh pair of cotton gloves should be used while handling bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
Store the media in cool, dry place (20-25oC, 55 % +10 RH) away from direct sunlight. When not in use, the media should be stored in its original packing.
Store the media in flat position, to avoid curling.

Disclaimer: - The information provided in this document us to be used only as guide. It does not imply any liability and shall not be binding upon the company. In pursuit of constant product improvement, specifications are subject to change without prior notice.