NovaSign PosterGloss PVC 100 SA (WPG 7214 D)

NovaSign PosterGloss PVC 100 SA
For eco-solvent, solvent, UV & latex inkjet printing of promotional displays
Product Description & Application
NovaSign PosterGloss PVC 100 SA (WPG 7214D) is a glossy, self-adhesive soft monomeric calendared vinyl with natural white hue. It is recommended for eco-solvent and solvent inkjet printing for outdoor & indoor applications such as posters, stickers & short-term advertising. This film offers superior flatness due to its double side coated PE liner; hence it can be used for screen printing of decals and other similar applications.
Features & Benefits
High Gloss PVC base makes this film excellent for signage
High ink limit ensures vibrant color gamut and vivid displays
Natural whiteness for high color contrast
Good sheet stability & lay flatness for ease of conversion and application
Excellent adhesion to a variety of substrates for wide range of applications
Siliconized double sided PE coated paper liner for excellent flatness
Product Specifications
Base
:
Soft monomeric calendared PVC Film
Base Thickness
:
100 microns (± 5 micron)
Finished product weight
:
290 ± 20 gsm
Surface Finish
:
Gloss, 70% gloss value at 60°
Adhesive
:
Permanent Clear solvent acrylic adhesive
Liner
:
140 gsm single side PE coated siliconized paper
Initial Adhesion
:
9-12 N / inch
Ink Compatibility
:
Eco-solvent & Solvent inks
Ink Limit
:
Around 350% with original inks
Shelf-Life
:
One year from the date of manufacture when stored in original packing at 20-25°C and 50% RH
Available Sizes
:
914 mm x 50 m; 1060 mm x 50 m; 1270 mm x 50 m; 1370 mm x 50 m; 1520 mm x 50 m
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used. Please consult the ink manufacturer for technical advice
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction, it is strongly recommended that the prints are laminated with a UV stabilized vinyl lamination media with a solvent-based adhesive
This media, when printed and protected as indicated above (with a laminate), can have an image life expectancy of up to 6 months
Usage Instructions
It is recommended to acclimatize the media in the normal printing environment for 24 hours before printing
A fresh pair of cotton gloves should be used while handling the bare media to avoid dirt & sweat transfer on the media that could interfere with the print quality
While printing, it is required to modify the print file to suit the ink limit of the media. For best results, please ensure proper color calibration
The media should be printed within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding, lower resolution and poor adhesion of the lamination media
Printed media should be protected by a cold, UV stabilized, pressure sensitive adhesive laminate only
Prints should be thoroughly dried before lamination
The lamination media must be checked for compatibility with the media
Exposure to more than 40°C through a heat lamination process is not at all recommended
When sandwiched between clear and translucent acrylic sheets, ensure that the prints are completely dry and the panels are thoroughly cleaned
Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing
When not in use, the media should be stored in its original packing in a vertical position