NovaSign PosterGloss PVC 80 SA
For eco-solvent and solvent inkjet printing of promotional displays
Product Description & Application
NovaSign PosterGloss PVC 80 SA (WPG 6513) is a glossy, self-adhesive soft monomeric calendared vinyl with bluish white hue. It is recommended for solvent & eco-solvent inkjet printing for outdoor & indoor applications such as posters, stickers and short-term advertising.
Features & Benefits
High Gloss PVC base makes this film excellent for signage
High ink limit ensures vibrant colour gamut and vivid displays
High whiteness for high color contrast
Excellent adhesion to a variety of substrates for wide range of applications
Siliconized PE coated, higher GSM paper liner for excellent anti-skid property
Product Specifications
Soft monomeric calendared PVC Film
Base Thickness
80 microns (± 5 micron)
Finished product weight
250 ± 20 gsm
Surface Finish
Gloss, 70% gloss value at 60°
Permanent Clear solvent acrylic adhesive.
Single side PE coated siliconised paper, 120 GSM
Initial Adhesion
6 N / inch
Ink Compatibility
Solvent & Eco-solvent inks
Ink Limit
Around 350% with original inks
One year from the date of manufacture when stored in original packing at 20-25°C and 50% RH.
Available Sizes
914 mm x 50 m; 1060 mm x 50 m; 1270 mm x 50 m; 1370 mm x 50 m; 1520 mm x 50 m
Compatible with original solvent & eco-solvent inks from printers of HP series, Epson series, HP Latex series, Roland series, Mutoh series, Mimaki JV series & wide range of UV printers.
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used. Please consult the ink manufacturer for technical advice.
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction, it is strongly recommended that the prints are laminated with a UV stabilized vinyl lamination media with a solvent-based adhesive.
This media, when printed and protected as indicated above (with a laminate), can have an image life expectancy of up to 6 months.
We do not recommend using our self-adhesive media with Poly Carbonate sheets as these sheets have tendency of releasing gases resulting in damage to the prints.
Pasting this media over existing printed vinyl is not recommended. The smooth surface of the old media as well as the presence of the ink layer on it, will not allow a strong bond to develop between the old media and this media. It should always be pasted directly on a smooth wall / PVC foam board.
Usage Instructions
It is recommended to condition the media in the normal printing environment for 24 hours before printing.
A fresh pair of cotton gloves should be used while handling the bare media to avoid dirt & sweat transfer on the media that could interfere with the print quality.
While printing, it is required to modify the print file to suit the ink limit of the media. For best results, please ensure proper color calibration.
The media should be printed within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding, lower resolution and poor adhesion of the lamination media.
Printed media should be protected by a cold, UV stabilized, pressure sensitive adhesive laminate only. The prints should be thoroughly dried before lamination.
The lamination media must be checked for compatibility with the media.
Exposure to more than 40°C through a heat lamination process is not at all recommended.
When sandwiched between clear and translucent acrylic sheets, ensure that the prints are completely dry and the panels are thoroughly cleaned.
Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
When not in use, the media should be stored in its original packing in a vertical position.