NovaSign PosterMatte PVC 100 SA
For eco-solvent, solvent UV & latex inkjet printing of promotional displays
Product Description & Application
NovaSign PosterMatte PVC 100 SA (WPM 6614) is matte, self-adhesive soft monomeric calendared vinyl with ceramic white hue. It is recommended for latex, UV, solvent & eco-solvent inkjet printing for outdoor & indoor applications such as posters, stickers and short-term advertising
Features & Benefits
Matte PVC base makes this film excellent for signage
Higher ink limit ensures vibrant and vivid displays
Good sheet stability & lay flatness for ease of conversion and application
Excellent adhesion to a variety of substrates for wide range of applications
Siliconized single sided PE coated 140 GSM paper liner gives excellent anti-skid property
Product Specifications
Soft monomeric calendared PVC Film
PVC Thickness
100 microns (± 5 microns)
Finished product weight
290 ± 20 gsm
Surface Finish
Permanent Clear solvent acrylic adhesive
Single side PE coated siliconised paper, 140GSM
Initial Adhesion
6 N / inch
Ink Compatibility
Eco-solvent, Solvent UV & Latex inks
Ink Limit
Around 350% with original inks
One year from the date of manufacture when stored in original packing at 20-25oC and 50% RH.
Available Sizes
914 mm x 50 m, 1060 mm x 50 m, 1270 mm x 50 m
1370 mm x 50 m, 1520 mm x 50 m & 2020 mm x 50 m
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used. Please consult the ink manufacturer for technical advice.
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction, it is strongly recommended that the prints are laminated with a UV stabilized vinyl lamination media with a solvent-based adhesive.
This media, when printed and protected as indicated above (with a laminate), can have an image life expectancy of up to 6 months.
Usage Instructions
It is recommended to condition the media in the normal printing environment for 24 hours before printing.
A fresh pair of cotton gloves should be used while handling the bare media to avoid dirt & sweat transfer on the media that could interfere with the print quality.
While printing, it is required to modify the print file to suit the ink limit of the media. For best results, please ensure proper color calibration.
The media should be printed within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding, lower resolution and poor adhesion of the lamination media.
Printed media should be protected by a cold, UV stabilized, pressure sensitive adhesive laminate only.
The prints should be thoroughly dried before lamination.
The lamination media must be checked for compatibility with the media.
Exposure to more than 40°C through a heat lamination process is not at all recommended.
When sandwiched between clear and translucent acrylic sheets, ensure that the prints are completely dry and the panels are thoroughly cleaned.
Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing. When not in use, the media should be stored in its original packing in a vertical position.