NovaSign BannerSatin PVC 200 (SRB 7008)

NovaSign BannerSatin 200
For eco-solvent, solvent, UV & latex inkjet printing of frontlit banners
Product Description & Application
NovaSign BannerSatin 200 (SRB 7008) is a tear-resistant PVC-PET composite media for eco-solvent, solvent, UV & latex inkjet printing. It is suitable for indoor & outdoor signage applications in roll-up banners, X banners and many more.
Features & Benefits
High whiteness for wide colour gamut and deep rich colours
High image definition and line clarity for better resolution and sharpness of images
Unique PVC-PET composite provides high temperature resistance on latex printers
High opacity (white blockout) for limited show through
Strong, non-curling base ensures standstill image in the banners
Product Specifications
PVC-PET composite
200 microns (± 10 microns)
Surface Finish
White Satin
Ink Compatibility
Eco-solvent, Solvent, UV & Latex based inks
Ink Limit
Up to 270% with Eco Solvent Inks
One year from the date of manufacturing when stored in original packing at 10-30°C and 35 to 65% RH (± 5%).
940 mm x 30 m; 1270 mm x 30 m; 1524 mm x 30 m; 900 mm x 50 m; 1067 mm x 50 m; 1270 mm x 50 m & 1524 mm x 50 m
Also available in custom size rolls on request
Compatible with original eco-solvent & solvent inks for printers of HP series, Epson series, Roland series, Mutoh series & Mimaki JV series & HP Latex series. This media is also suitable for printing with UV based inks.

Note : Pre-test the compatibility of the inks with the media for the design application, before commencing actual production. To achieve the best possible print quality, please make sure that the correct ICC profiles and heater settings are used. For further assistance, please contact our HelpDesk.
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used. Please consult the ink manufacturer for technical advice.
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction, it is strongly recommended that pigment inks are used for printing and that the prints are laminated with a UV stabilised vinyl lamination film with a solvent-based adhesive.
This media, when printed with water-based pigment inks and protected as indicated above (with a laminate), can have an image life expectancy of up to 6 months.
Usage Instructions
It is recommended to condition the media in the normal printing environment for 24 hours before printing.
While printing, care must be taken to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration.
The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding and lower resolution.
Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
Post-processing for hem is not required. If necessary, banner tape is preferred to sewing. Grommets should be placed through 2 layers in the hemline.
Corner grommets should be placed where the vertical and horizontal hemlines meet, so that they pass through the 4 layers of the media.
A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
When not in use, the media should be stored in its original packing in a vertical position.