NovaSignTM BannerSatin 260 Tex
For eco-solvent & solvent inkjet printing of frontlit banners
Product Description & Application
NovaSign BannerSatin 260 Tex (SRB 32711) is a white opaque satin, tear-resistant PVC-PP composite media for eco-solvent & solvent inkjet printing. The face of the media has a texture finish to give your prints a unique textured look. It is suitable for indoor and outdoor signage applications in spring banners, roll-up banners, stand banners and many more.
Features & Benefits
Superior whiteness for wide colour gamut and deep rich colours
Tear resistant and lay flat property for trouble-free mounting and framing
High image definition and line clarity for better resolution and sharpness of images
High opacity for limited show through
Strong, non-curling base ensures standstill image in the spring banner
Product Specifications
Base
:
PVC-PP composite
Thickness
:
260 microns (± 10 microns)
Surface Finish
:
Clear Satin with textured finish
Ink Compatibility
:
Eco-Solvent & Solvent based inks
Ink Limit
:
Up to 270 % with Eco-Solvent inks
Shelf-Life
:
One year from the date of manufacturing when stored in original packing at 20-25o C and 50-65% RH.
Availability
:
940 mm x 50 m
Compatibility
Compatibility with original eco-solvent & solvent inks for printers of HP series, Epson series, Roland series, Mutoh series & Mimaki JV series & HP Latex series. This media is also suitable for printing with UV based inks.

Note: Pre-test the compatibility of the inks with the media for the design application, before commencing actual production. To achieve the best possible print quality, please make sure that the correct ICC profiles and heater settings are used. For further assistance, please contact our HelpDesk.
Durability of Media
The durability of the printed image is dependent on the fading characteristics of the inks used.
Avoid using unbranded inks. Please consult the ink manufacturer and printer manufacturer for technical advice on the suitable inks.
If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction while mounting on surface or cleaning after mounting. It is strongly recommended that the prints are laminated with a cold, pressure sensitive vinyl lamination media.
Usage Instructions
It is recommended to condition the media in the normal printing environment for 24 hours before printing.
Pre-test the compatibility of the inks with the media for the design application, before commencing actual production.
To achieve the best possible print quality, please make sure that the correct ICC profiles, colour calibration are used. For further assistance, please consult our HelpDesk.
While printing, care must be taken to modify the print file to suit the ink limit of the media.
The media should be printed within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding, lower resolution and poor adhesion of the lamination media.
Printed media should be thoroughly dried before rolling-up for transport to avoid smearing.
Printed media should be protected by cold, pressure sensitive lamination media. The prints should be thoroughly dried before lamination. The lamination media must be checked for compatibility with the media.
When not in use, the media should be stored in its original packing.