Clean glass thoroughly using AutoServe Shampoo MW.
Squeegee off excess water and allow drying completely, ensuring that glass is moisture free.
1st Coat: Soak a small clean soft cloth with AutoServe Water Repellent.
Apply the solution by moving the soaked cloth in small circular motion ensuring that water repellent covers
complete glass surface without gaps. Allow the solution to remain in contact for at least 5 minutes.
Buff down the applied layer of solution with a soft clean dry absorbent tissue or cloth ensuring an invisible,
even layer of coating over the total glass area. Allow the buffed layer of coating to dry for 10 minutes.
2ndCoat: Repeat the application process as narrated above.
Finishing: After 10 minutes of drying of the second coat, wipe the glass thoroughly using fresh clean
absorbent cloth or dry tissue paper ensuring that the surface looks perfectly clean and streak free.
Caution: For the best results AutoServe Water Repellent should be applied when the glass is not wet or hot; and away from direct sunlight.